ISO 13485 Certified Dental Device Programs FDA Reg. support · CE MDR files · UDI-ready catalog · FSE service desk
Clinical insight

Straumann Practical FAQ: 6 Questions From Someone Who Learned the Hard Way

2026-11-20 · Priya Nanduri

Straumann Practical FAQ: 6 Questions From Someone Who Learned the Hard Way

I've been handling Straumann orders for dental clinics for 6 years. In that time, I've made roughly 5 significant mistakes totaling somewhere around $4,200 in wasted budget. Not the kind of "oops, we shipped the wrong motor" mistakes — the subtler ones that looked correct on my screen and only surfaced after the shipment was already processed.

This FAQ comes from those mistakes. I ordered the questions by how often they come up, not by what Straumann would prefer I talk about.

1. What's the actual difference between Straumann Standard and Standard Plus?

It comes down to the neck design.

Standard has a machined (smooth) neck. It's designed for posterior regions where aesthetics aren't critical — the thicker soft tissue biotype usually hides the smooth neck just fine.

Standard Plus has a micro-rough neck. That micro-roughness supports soft tissue attachment. It's the better pick for anterior regions or patients with a thin soft tissue biotype.

Here's what catches people off guard: Standard Plus also has a narrower shoulder profile. If your guided surgery protocol was built around Standard, the Standard Plus may require adjustment — or at least a quick check of your template design before you commit.

In my experience, 80% of the "wrong implant" issues we've had came down to someone ordering Standard when they meant Standard Plus (or vice versa). The price difference is close enough that the mistake isn't obvious until the clinic is placing the implant.

In September 2019, we shipped 40 Standard implants to a clinic doing anterior cases. The client called two days later — they needed Standard Plus. The return and re-ship cost roughly $1,200, plus a missed surgical date.

2. How should I actually read the Straumann Surgical Motor Pro manual?

Strategically, not linearly.

The manual is thorough — almost too thorough. If you read it cover to cover expecting to come out an expert, you won't. You'll come out tired.

Here's the order I use:

  • First: the quick-start section. It tells you what buttons do what and how to calibrate torque limits. This is the part that matters on day one.
  • Second: the error codes. Skip to the back and read the troubleshooting section. You'll need this at some point, and it's much easier to learn it when you're not panicking.
  • Third: the maintenance schedule. The motor needs specific cleaning and calibration intervals, and missing them is what leads to early failures.
  • Fourth: the rest. It's reference material. You'll never read it in one sitting, and you don't need to.

One more thing: the manual is versioned by motor model. The Surgical Motor Pro is not the same as the previous generation. If you're comparing a printed manual from 2018 to a current digital version, they may differ in the torque settings section.

In May 2021, we calibrated a motor using an old manual version. The torque limits were set slightly lower than intended for that specific implant line. We caught it during a surgical prep review, not during surgery — but that was luck, not procedure.

3. What's the most expensive Straumann component mistake I've made?

TiBase coding.

Straumann's component numbering is logical once you understand the system, but if you're ordering across implant lines — Standard, Standard Plus, Bone Level, BLT, BLX — the nuance between platforms is where things fall apart.

In 2020, we ordered a batch of TiBases for a mixed-platform order. The TiBase for the Standard Platform isn't the same as the one for Bone Level. The catalog shows them separately, but the naming is similar enough that if you're not paying attention, you'll order the wrong one.

Cost: $2,400 in incorrect parts plus a 2-week delay while the correct ones shipped. The client had to reschedule 3 surgical procedures.

We caught it when the lab technician opened the box and immediately noticed the thread pattern was different. He'd seen this mistake from another vendor before.

Now I have a two-person verification rule for any order containing TiBase components. One person reads the implant platform, the other confirms the number.

4. Do I need a CT scanner for Straumann guided surgery?

For guided surgery, yes — a CBCT (cone beam CT) scanner is effectively required. Dental CT scanners (as opposed to medical-grade CT) provide the higher-resolution imaging needed for accurate template design.

But here's the nuance: not every provider has a CBCT on-site. Some clinics refer patients to a local imaging center. That works, but you need to account for:

  • The scan needs to be in the right format (DICOM). If they send it as a JPEG, you're starting over.
  • The scan needs to include the relevant jaw segment at sufficient resolution. A full-arch scan at the wrong FOV may not suffice for a single implant site.
  • Turnaround affects your surgical timeline. A same-day CBCT plus same-day planning is rarely realistic if the imaging is outsourced.

In February 2022, we had an order delayed because the original CBCT scan was sent to the wrong email — as a JPEG. By the time we noticed, the week's surgical schedule had already been built around it.

5. Should I buy a hospital bed for my implant recovery area?

Probably not — but I understand why it comes up.

For most dental clinics, a standard dental chair with proper reclining capability is enough for routine implant recovery. Hospital beds are larger, require more space, and aren't designed for dental workflows.

That said, if you're expanding into longer procedures (full-arch cases, extensive grafting), some clinics have considered a dedicated recovery area. If you go that route, the same equipment-planning principles apply: check the footprint, check the power requirements, and — this is the important one — check whether the bed is actually going to be used or just occupy a corner.

I spent $280 on a "recovery cot" in 2021 that was used exactly 3 times. That's roughly $93 per use. Not the worst ROI I've had, but not great either.

The same logic applies here as to your Straumann equipment: buy what the workflow actually requires, not what looks impressive on a spec sheet.

6. What is spine surgery, and why does it keep showing up in dental equipment searches?

Honest answer: spine surgery is outside the scope of dental implant work — it's surgery on the spinal column, usually performed by orthopedic or neurosurgeons. But there's a reason it keeps appearing in equipment discussions.

Straumann has a spine division. Most people don't know that because the dental side is far more prominent. But when you're searching across the Straumann product catalog, you'll occasionally bump into spinal products — and if you're not careful, you'll wonder if you've landed in the wrong section.

My recommendation: if you're ordering for a dental clinic, stay inside the dental catalog. Don't try to source "adjacent" or "equivalent" products from the spine side. The product codes, platforms, and surgical protocols are entirely separate.

That said, many procurement principles do translate — checking part numbers, verifying compatibility, confirming current manual versions. Those apply across medical device types. Just don't try to order your dental implant motor from the same place you'd source a spinal navigation system.

If someone on your team asks "what is spine surgery" in the middle of a dental equipment order, that's usually a sign that cross-selling is happening. Walk them back to the dental catalog.

7. What's on your Straumann pre-order checklist?

Here's what we use:

  1. Confirm the implant platform. Standard vs Standard Plus vs Bone Level vs BLT. Say it out loud and write it down.
  2. Confirm the component compatibility. TiBase, abutments, and surgical kits are platform-specific. Cross-check against the implant line.
  3. Verify the manual version. If you're working from a printed manual, check the date and compare it against the current digital version.
  4. Check the shipping timeline against the surgery date. If the clinic is scheduling surgery within 5 days, standard shipping is probably too tight.
  5. Have a second person sign off. Any order over $1,000 or containing TiBase components gets a second pair of eyes.
  6. Log the order. Something as simple as a spreadsheet with order date, product code, price, and client. We've used this to trace 3 mistakes that would have gone unnoticed otherwise.

This list has caught 47 potential errors in the last 18 months. That's roughly $11,000 in avoided rework.

It's not that every catch would've been catastrophic — but by the time you're ordering dozens of components for multiple clinics, the checklist turns from "nice to have" into "how did we ever operate without this."

And honestly? I wish I'd built it sooner. I probably wouldn't have spent $3,800 on mistakes I should've seen coming.

Priya Nanduri

Priya Nanduri

Priya Nanduri is a surgical and interventional device analyst specializing in flexible and rigid endoscopes, endotherapy devices, surgical instruments, catheters, stents, energy systems, and robotic platforms. She uses ISO 8600-1 and ISO 14971 while comparing optical resolution, field of view, insertion diameter, articulation, leakage integrity, electrical safety, cleaning compatibility, and use-related risk controls. Her analysis supports surgeons, sterile-processing teams, biomedical engineers, and value committees selecting equipment for procedural access, visualization, reprocessing, reliability, and clinical workflow.